MV-3L

Desktop AOI Machine - MV-3 Series

Ex-Demonstrator MV-3L with 5 x 2Mpx Top and angled cameras, Intelli-beam laser height inspection system. Only used for a few hours for customer evaluations whilst held in a demo centre.

The MV-3 Desktop AOI Systems are designed to automatically inspect for manufacturing defects both pre and post reflow. These systems offer superior fault coverage and will detect defects such as component presence/absence, polarity, miss alignment, insufficient solder, solder bridging, etc. The system software is very powerful yet extremely simple to use. The standard SPC software package promotes continuous process improvement by allowing the user to track and eliminate defects on inspected assemblies.

Contact us for Details and Pricing.

Ex Works Israel.

Product Details

MV-2BTL

Desktop AOI Machine MV-2 Series

Trade in ex-customer MV-2BTL desktop AOI system, would suit existing Mirtec user with the same system, or customers that who are in the market for a Low Cost / High Performance AOI Inspection System. These systems are designed to automatically inspect for defects both pre and post reflow. They offer superior fault coverage for both SMT and thru hole assemblies and will detect defects such as component presence/absence, polarity, misalignment, insufficient solder, excessive solder, solder bridging, bent leads lifted leads solder balls and more!

SPECIAL OFFER PRICE

Contact us for Details and Pricing.

Ex Works Germany

Product Details

MV-7xi

In-Line AOI Machine

Ex Demo MV-7xi In-Line AOI System configured with one Top-Down View 2 Mega Pixel camera and four (4) 2 Mega Pixel Side-View Cameras. The patented “Quad Angle Lighting System” provides four independently programmable zones for optimal illumination of inspection areas. The MV-7xi has a three-stage PCB conveyor.

The system is configured with MIRTEC’s exclusive Intelli-Scan Laser System. This advanced technology offers superior lifted lead detection for gull wing devices, four-point height measurement capability for co-planarity testing of BGA and CSP devices, and enhanced solder paste measurement capability.

The MV-7xi is powerful yet simple to use. A comprehensive Package Type Library provides simple “Drag and Drop” component programming. The Automatic Teaching Tool (ATT) software provides automatic teaching of component locations using CAD centroid data.

SPECIAL OFFER PRICE

Contact us for Details and Pricing info.

Ex Works Germany.

Product Details

MV-7xi 2D-3D

MV-7xi 3D Inline AOI

MIRTEC are very excited to present what is unquestionably the Inspection Industry’s most Technologically Advanced AOI System and winner of the 2011 Global Technology Award. MIRTEC’s all new MV-7 Series 2D/3D AOI Systems may be configured with a state-of-the-art 15 Mega Pixel top-down camera system which we affectionately refer to as ISIS. This is a proprietary camera system designed and manufactured by MIRTEC for use with our complete product range of inspection equipment. ISIS is an acronym for Infinitely Scalable Imaging Sensor. As the name implies the ISIS Vision System may be scaled or modified to address the specific inspection requirements of virtually any production environment without sacrificing speed or performance. By changing the magnification of the Precision Telecentric Lens the resolution of optics system may be scaled from 20 microns/pixel with an incredibly large FOV of (77.7mm x 77.7mm) desired for extremely high speed manufacturing; down to 10 microns/pixel with an FOV of approximately (38.8mm x 38.8mm) which is suitable for high end micro-electronics manufacturing. MIRTEC’s revolutionary 3D Multi Frequency Quad Moiré Technology, provides true 3D inspection of SMT devices on finished PCB assemblies using a total of four (4) Moiré Inspection Probes. This proprietary system yields precise height measurement used to detect lifted component and lifted lead defects as well as solder volume post reflow. Fully configured the new MIRTEC MV-7 machines will also feature four 10 Mega Pixel Side-View Cameras in addition to the 15 Mega Pixel Top-Down Camera. There is little doubt that this new technology will, undoubtedly, set the standard by which all other inspection equipment will be measured.

 Speed / Throughput Improvements: MIRTEC’s ISIS Vision System brings unprecedented speed and performance to the Electronics Inspection Industry. In order to quantify the throughput advantage of this system, we must fist consider that the majority of high resolution camera systems currently offered by AOI vendors use 5 Mega Pixel Technology. Throughput comparisons between 5 Mega Pixel Technology and 15 Mega Pixel Technology have resulted in an increased throughput of nearly 400%! This is a tremendous improvement in production efficiency which, you can imagine, will certainly be leveraged by global customers in volume-driven sectors.

 Quality Contribution: MIRTEC’s new MV-7 Series 2D/3D Inspection Systems allow users to achieve unprecedented standards in quality manufacturing by combining:

1) MIRTEC’s exclusive 15 Mega Pixel ISIS Vision System which provides incomparable 2D inspection speed and accuracy.

2) MIRTEC’s revolutionary 3D Multi-Frequency Quad Moiré Technology which provides true 3D inspection of SMT devices on finished PCB assemblies. This proprietary system yields precise height measurement used to detect lifted component and lifted lead defects as well as solder volume post reflow.

 Cost Benefits: Current market conditions are such that electronics manufacturers are competing to capture as much business as possible in an environment which yields ever decreasing profit margins. There is little expectation that these market conditions will change in the foreseeable future. The reality of the situation is that electronics manufacturers must invest in automated solder paste inspection and automated optical inspection equipment in order maximize efficiency and acquire quantitative information that may be used to streamline the manufacturing process and reduce manufacturing defects. By increasing first pass production yields, manufacturers are able to decrease costs, save time, and reduce the need for non-value added rework and repair. MIRTEC’s new MV-7 Series 2D/3D AOI Machines provide manufacturers with a clear view into the manufacturing process, helping them achieve higher operating efficiencies and improved quality at the lowest possible cost. Additionally, MIRTEC’s ISIS Vision System has been proven to increase throughput by up to 400% thereby maximizing production efficiency and return on investment.

 Environmental Consideration: With an industry focus on environmentally friendly manufacturing, now more that ever there is an increasing demand to drive down material waste. MIRTEC AOI equipment is well recognized by electronic manufacturing management as a cost-effective process solution which allows them to streamline the manufacturing process. The new MV-7 Series 2D/3D machines provide an extensive range of real-world process solutions to electronics manufacturers allowing them to minimize material waste as they continue to strive toward zero defect production.

 Ease of Use / Implementation: The MV-7 Series software is simple yet powerful. A comprehensive Package Type Library provides simple “Drag and Drop” component programming. The Automatic Teaching Tool (ATT) software provides automatic teaching of component locations using CAD centroid data. Typical programming time is under one (1) hour per assembly.

 Maintainability / Reparability: The new MV-7 Series 2D/3D product line was designed for easy accessibility to all hardware and electronic subsystems. Furthermore, these machines are use “off the shelf” hardware for many of the electronic subsystems including the PC, Vision Frame Grabber and Motion Control System. These systems are built to withstand 24/7 production. With typical MTBF of over 4,000 hours of operation, these AOI systems are heralded as the most robust AOI systems on the market!

Product Details

XT-1000

Measurement System

XT-1000 VMU, Compact video measurement system

Product highlights:

• Compact desktop video CMM
• Economical & cost effective
• Easy to use

Featuring:

• Quick release 4" x 8" stage
• 1 Micron resolution optical encoders
• High resolution large live image & geometric CAD image
• Zoom lens with detents
• 1.3 Mega pixel colour USB camera
• 21.5" All-in-one touch screen PC
• Import& export CAD DXF file
• LED top & back light
• 2 axis measurement
• Complete desktop system

For full details please view the PDF, using he link below.

Product Details

MV-2HT Series

Desktop AOI Machine - MV-2HT Series

The MV-2HT series is discontinued as our technologies have progressed into the latest MV-2GT and MV-3L range. However there are thousands still in use and Mirtec still offers support where required.

The MV-2HTL Desktop AOI Systems are designed to automatically inspect for manufacturing defects both pre and post reflow. These systems offer superior fault coverage and will detect defects such as component presence/absence, polarity, miss alignment, insufficient solder, solder bridging, etc. The system software is very powerful yet extremely simple to use. The standard SPC software package promotes continuous process improvement by allowing the user to track and eliminate defects on inspected assemblies.

Product Details

MV-2GT

MV-2GT Benchtop AOI

The MV-2GT see's the return of the name upon which Mirtec was launched, thousands of earlier model MV-2 benchtop AOI's are working today. The release of this all new modernised GT version, offers affordable technology from Mirtec.

The system utilizes a single top down 5Mega pixel camera, Auto clamp positioning and three tier lighting. These systems offer superior fault coverage and will detect defects such as component presence/absence, polarity, miss alignment, insufficient solder, solder bridging, etc.

The system software is very powerful yet extremely simple to use. The standard SPC software package promotes continuous process improvement by allowing the user to track and eliminate defects on inspected assemblies.

The M-2GT offers the World leading Mirtec technologies in an affordable package and is supported by our strategic global infrastructure.

Product Details

MV 7 Series

In-Line AOI Machine

• Five Camera In-Line AOI System.
• Four Mega Pixel Digital Color Camera Technology
• Integrated INTELLI-SCAN Laser Inspection System.
• Extremely Simple Programming and Operation.
• Unsurpassed Defect Detection.
• Ultimate Reliability.
• “World Class” Global Customer Support.
• Exceptional Cost/Performance.

Product Details

MV-3 Series

Desktop AOI Machine - MV-3 Series

The MV-3 Desktop AOI Systems are designed to automatically inspect for manufacturing defects both pre and post reflow. These systems offer superior fault coverage and will detect defects such as component presence/absence, polarity, miss alignment, insufficient solder, solder bridging, etc. The system software is very powerful yet extremely simple to use. The standard SPC software package promotes continuous process improvement by allowing the user to track and eliminate defects on inspected assemblies.

Product Details

MS-11

In-Line SPI Machine

• High Speed Precision In-Line SPI System.
• FOUR or FIFTEEN MEGA PIXEL Digital Camera Technology.
• Precision TELECENTRIC Compound Lens Design.
• 10 Micron / Pixel Resolution.
• 2 Micron Height Accuracy.
• Volume Repeatability +/- 2%.
• Extremely Simple Programming and Operation.

Product Details

MX1000

80Kva X-Ray

Operation and Maintenance Manual

Product Details

MX1800

90 KVa X-Ray System

Product Details

XS2000

X-SCOPE 2000

Fully Programmable Real-Time MicroFocus X-Ray

True 5 micron Focal Spot Size

90kV Standard

Real Time 1280 x 1024 Output

125X Geometric Magnification

600X Optical Magnification

CNC Capability

Online Live Demo of your application

FDA Approved

Improve your quality control without hurting your bottom line. Introducing our new design and model, MIRTEC X-Scope 2000 inspection system is an affordable, yet extremely powerful solution.

Range of Applications:
Parts-presence-placement - Resistance welds - Aluminium die casting - Plastic molding Solder joint quality - BGA, IC and component inspection - Miscellaneous research

Mirtec can do sample demos over the internet; you can see the sample being x-rayed real-time while we explain what you are seeing in the images and the technique factors (kV-mA-magnification) that are being used. We can also demonstrate all of the X-Scope 2000 physical and software features. During the online demo we can turn the control of the system to you; you can control all of the functions of the X-Scope 2000 from your desktop. This works well for companies that have decision makers in numerous locations because there is no limit to the amount of people that can log on to the online meeting.

Product Details

MX2300

130 KVa X-Ray System Hi-resolution

Product Details

MX2500

90 Kva X-Ray System

Product Details